Sat. Nov 21st, 2026

Brussels, 6 October 2026

The European Commission proposed today to modernise the European standardisation system to make it faster, increase the representation of small- and medium-sized enterprises, and better equipped to support the European Union’s strategic interests. Standards are essential to the functioning of the EU economy. They help ensure safety and interoperability, provide legal certainty, and enable market access across sectors ranging from clean technologies and batteries to construction products, cybersecurity and advanced manufacturing.

Harmonised European standards play a central role in helping businesses demonstrate compliance with EU legislation, reducing costs and enhancing quality and consumer trust. However, the current standardisation system faces challenges in keeping pace with rapid innovation and technological developments, which necessitate the timely development of standards.

The Commission is therefore proposing a revision of the existing legislation to make standards development more responsive while preserving its core strengths as a public-private partnership involving European standardisation organisations.

A faster and more responsive system

The proposal introduces clearer deadlines for the development of standards requested by the Commission and clarifies the use of common specifications as a targeted fallback measure.

The Commission is also proposing to allow greater use of external technical specifications under defined conditions and safeguards. Furthermore, it would allow interim deliverables to support conformity. This would help innovative solutions reach the market faster while full standards are still being developed. The Commission is also proposing to let other standard development organisations contribute to technical work where urgent or highly specialised needs arise.

The Commission estimates these measures would together reduce the average time needed to develop a standard from six years to four years, thus increasing the ability of the Union to shape standardisation globally while simplifying the access of businesses to the Single Market.

A more inclusive and accessible system

The proposal introduces provisions that strengthen the obligations for European and national standardisation organisations to ensure effective participation and representation for small- and medium-sized enterprises, civil society, academia and public authorities in the standardisation process. The proposal also introduces transparency and accountability requirements. Broader participation will help bring a wider range of expertise into the standardisation process.

Following recent rulings from the European Court of Justice, the Commission proposes to codify those rules to ensure free access to standards developed under EU law through the creation of dedicated repositories thus making standards easier to access for businesses, public authorities, civil society, and citizens.

A stronger and more coordinated European voice internationally

Because standards play an important role in getting products on the market, jurisdictions that invest in standard-setting are more likely to see their standards adopted at the global level. Given this geopolitical importance, the proposal also contributes to stronger Union coordination in international standardisation. This will support a more coherent approach by helping promote European interests while remaining in line with WTO principles.

The Commission is also proposing to create an Expert Centre on European Standardisation to ensure stronger strategic steering, better cross-policy coordination, and closer alignment between standardisation work and EU priorities.

Next steps

The proposed measures will now be examined by the European Parliament and the Council of the European Union before their adoption and entry into force.

Background

European standardisation has long been a cornerstone of the Single Market, helping remove technical barriers by providing a common framework for products and services across the Union.

The system is currently based on cooperation between the recognised European Standardisation Organisations (CEN, CENELEC and ETSI), national standardisation bodies, industry, public authorities, consumer representatives, trade unions, environmental organisations and other stakeholders.

The current framework for European standardisation is set out in Regulation (EU) No 1025/2012 on European standardisation, which establishes the legal basis for the development of European standards and harmonised standards in support of Union legislation and policies.

Over the past decade, the EU has taken steps to strengthen this framework, including through the 2021 Standardisation Strategy and the 2025 evaluation of Regulation (EU) No 1025/2012.

Today’s proposal builds on that work by updating the governance and tools of the system so that it can continue to support innovation, competitiveness, and the Union’s broader policy objectives in a rapidly evolving economic and geopolitical context.

For more information
Quote

Europe has been a global leader in standardisation for decades. We must remain one. Standards may be technical, but they are also strategic: those who set the standards shape the technologies, products and markets of tomorrow. A strong European standardisation system is therefore essential to a functioning Single Market, competitiveness, our technological sovereignty and our economic security. Europe must continue to set the rules, rather than simply follow standards designed elsewhere.

Stéphane Séjourné, Executive Vice-President for Prosperity and Industrial Strategy

Source – EU Commission

 


EU Commission: Questions and answers on the new Standardisation Regulation

6 October 2026

What is a standard and how are standards developed in Europe?

A standard is a technical document that sets specifications for a product, service, or process. It is written by experts and then adopted by consensus. It covers a wide range, from the size of a sheet of A4 paper to the safety of a child’s toy or the compatibility of a phone charger.

Many standards are voluntary, but even when voluntary businesses have a strong incentive to apply them. A product made to a recognised standard can be sold across the Single Market rather than need to be adapted to divergent national rules. It demonstrates safety and quality, ensures interoperability, and lowers costs.

In Europe, standards are developed through a public-private partnership. The three European Standardisation Organisations (CEN, CENELEC, and ETSI) work with national standardisation bodies, with standards drafted by experts from industry, consumer organisations, employee representatives, civil society, academia, and public authorities. While the Commission does not write standards itself, it can request the drafting of standards to support EU legislation and help finance the system.

Why are harmonised standards important for the Single Market?

Harmonised standards are important for the Single Market because they translate EU legal requirements into one practical set of technical specifications that can be used across all Member States. Developed by CEN, CENELEC, or ETSI at the Commission’s request, they give products and services a presumption of conformity with EU law once cited in the Official Journal of the European Union.

This gives them a special legal role. By providing one recognised route to compliance, they reduce technical barriers to trade, support the free movement of goods and services, and make it easier and cheaper for businesses, especially small and medium-sized, to access the EU market while ensuring safety, interoperability and consumer trust.

How will this help businesses, especially small- and medium-sized enterprises?

The new Standardisation Regulation will reduce the time needed to develop a standard by one third and allow products to benefit from presumption of conformity sooner, facilitating market access and reducing compliance costs. They will also benefit from free access to standards supporting EU law.

Smaller businesses will particularly benefit from faster standards, free access to them and easier market access. The proposal also requires national standardisation bodies to reduce the costs of taking part in standardisation for small and medium-sized companies.

Who develops standards in Europe and what will change with the new Regulation?

Standardisation in Europe relies on a public-private partnership. At European level, three officially recognised European Standardisation Organisations are responsible: CEN, covering most sectors; CENELEC, for the electrotechnical field; and ETSI, for telecommunications and ICT. They work with the national standardisation bodies of each Member State, and the technical content is written by experts from the industry (including from small or medium businesses), public authorities, consumer organisations, employee representatives, environmental organisations, academia, and other relevant groups. For content of international relevance, the European organisations cooperate closely with their global counterparts: ISO, IEC, and ITU.

The new Regulation will retain the same system with one key improvement: the Commission, after consulting the European Standardisation Organisations, will be able to send standardisation requests to designated standardisation organisations. This will allow it to rapidly mobilise the requested expertise while preserving the central role of European standardisation organisations in the process.

How will you increase the speed of standards development?

We will speed up standardisation by making the system more agile, more predictable, and less bureaucratic. Concretely, this means faster uptake of high-quality existing specifications into European standards, clearer use of common specifications, and temporary presumption of conformity for certain emerging technical deliverables. We will also improve planning and accountability through better anticipation of needs, the implementation of key performance indicators, and real-time monitoring via a digital platform. Finally, we will introduce binding deadlines, simplify procedures and, under strict safeguards and with Member States’ approval, allow alternative routes for certain Commission requests to be sent to Standardisation Organisations other than the three European Standardisation Organisations.

How does the European standardisation system interact with international standards and what will the proposal change?

The European and international standardisation systems are closely connected. Under a long-standing cooperation agreement, the Vienna Agreement between CEN and ISO and the Frankfurt Agreement between CENELEC and IEC, a large share of European standards are adopted from, or aligned with, international standards. This avoids duplication of effort and supports global trade, consistent with the World Trade Organization’s principles on technical barriers to trade. At the same time, the EU is increasingly unable to rely on standards providing presumption of conformity in new strategic technologies such as AI, cyber, and batteries, while other economies move faster. This is one of the factors behind the proposal’s emphasis on international coordination. The reform therefore promotes stronger Union coordination in international standardisation bodies, so that the EU can promote its interests and values more effectively as standard setting becomes more geopolitically significant.

Will standards be free? How will European standardisation organisations finance standardisation if standards are free?

Recent rulings from the Court of Justice of the EU established that standards referenced in EU legislation are part of EU law and therefore must be made available for free. Therefore, the proposal introduces a key change to the current standardisation system: harmonised standards and standards referenced in EU law would be freely accessible. Those standards in scope represent around 3,650 standards out of the 27,000 ones available on European standardisation organisations’ catalogues.

Harmonised standards only represent a small part of European standardisation organisations’ revenues. ETSI standards are already free – and not only the harmonised ones.

Digitalisation creates possibilities for European standardisation organisations to offer new services that both add values for standard users and create new sources of revenues for them.

Will there be transition periods?

Most major EU legislative changes include a transition period between adoption and application, giving businesses and authorities time to adapt. The exact duration will be set in the final legal act.

When will the new rules enter into force?

That depends on the legislative process. Typically, EU legislation enters into force after formal adoption and publication in the Official Journal of the European Union, with application beginning either immediately or after a set transition period.

For more information

Source – EU Commission

 

Forward to your friends